Best Place To Mount Gopro On Car – Top 7 Picks and Reviews 2020

We went through all of the review sites and found the best of the best using our data-backed approach.

Here’s a look at the best Place To Mount Gopro On Car

Bestseller No. 1
Hidden Camera-1080P Portable Mini Security Camera Nanny Cam with Night Vision/Motion Detection...
  • 【HD Video Day & Night】: Full HD video recorder 1920 x 1080p 30 fps, 140 degrees viewing angle, capture landscape videos on a wider angle, enhanced 4pcs IR led light ensure good performance at dark and low-light conditions.
  • 【Motion Detection】: The mini camera will start recording once detect any movement and save video in the memory card. Moreover, if use motion detection recording mode function alone, the battery can lasts for up to one week, which save battery greatly.
  • 【180°rotated camera lens】: The mini camera lens can be adjusted 180 degree that is very convenient to record video at different angel of view. The mini hidden cameras are widely used such as safe deployment, commercial deployment, daily life, law enforcement forensics, driving records, training and other occasions.
  • 【High Capacity Li-ion Battery】:This hidden Camera with about 1200mah large capacity lithium battery, can work for about 10hours minutes continuously after a full charge. It can record video and charge at same time.
  • 【Easy to Use】: Just slot in a T-Flash card and start recording. You can put the portable camera in the corner of home, office, warehouse, store, backyard, garden, even in your pocket or on your collar with the clip included .In addition , it can also be used as a car camcorder or an aerial action camera.
SaleBestseller No. 2
YOLOtek GoPro Boat Mount PowerStick-53” Gen3 Mini-Bundle - Navigation Light Mount Compatible with...
  • POWER YOUR GOPRO ALL DAY LONG: Convert 12 volts from the navigation light port to 5 volt USB. Record all day with little impact to your Cranking Battery.
  • USES POWER FROM YOUR NAVIGATION LIGHT PORT: Has a 3 hole base plug so it works with all 2 and 3 plug nav light ports on front or back of boat. Includes over current protection and polarity correction.
  • LIKE HAVING A CAMERAMAN ON YOUR BOAT: Uses a ball and joint mount for max coverage of any angle with quick adjustments.
  • EXTENDS FROM 34” TO 53”: Securely mounts for speeds up to 70 MPH with guide screw locking or threaded ports / collars. Adjustments are easy with the customizable hand grip.
  • MINI BUNDLE INCLUDES: Generation 3 Powerstick, Silicone Dielectric Compound, Truck/Boat Decal.
Bestseller No. 3
YOLOtek GoPro Boat Mount PowerStick-53” Gen3 Super-Bundle - Navigation Light Mount Compatible with...
  • POWER YOUR GOPRO ALL DAY LONG: Convert 12 volts from the navigation light port to 5 volt USB. Record all day with little impact to your Cranking Battery.
  • USES POWER FROM YOUR NAVIGATION LIGHT PORT: Has a 3 hole base plug so it works with all 2 and 3 plug nav light ports on front or back of boat. Includes over current protection and polarity correction.
  • LIKE HAVING A CAMERAMAN ON YOUR BOAT: Uses a ball and joint mount for max coverage of any angle with quick adjustments.
  • EXTENDS FROM 34” TO 53”: Securely mounts for speeds up to 70 MPH with guide screw locking or threaded ports / collars. Adjustments are easy with the customizable hand grip.
  • SUPER BUNDLE INCLUDES: PowerStick 53", Silicone Rainproof Putty, QuadCord-12" (4-in-1 USB Power Cord), Just-In-Case Tether, Silicone Dielectric Compound & Truck / Boat Decal
SaleBestseller No. 4
MiPremium Car Suction Cup Mount for GoPro Hero 9 8 7 6 5 4 3 3+ 2 Session Black Silver XIAOYI 4K...
10 Reviews
MiPremium Car Suction Cup Mount for GoPro Hero 9 8 7 6 5 4 3 3+ 2 Session Black Silver XIAOYI 4K...
  • ►【SNUG FIT, STRONG HOLD - HEAVY DUTY DURABLE MOUNT】 YOU NEED A SUCTION MOUNT WITH STRONG HOLD & DOES NOT BREAK DURING YOUR THRILLING RIDES. Made of durable ABS, PC and metal ball joint. Packaged with a stainless steel rustproof thumbscrew, perfect for indoor and outdoor use in all weather conditions.
  •  ►【DO NOT BREAK ANOTHER ACTION CAMERA 】 Designed to keep your camera securely and firmly in place during your thrilling rides. MiPremium Suction cup camera mount comes with a 3.5"/90mm suction cup area which is made of two layer TPU to offer great powerful suction capacity. Stick our dashcam mount on windscreens, glassware, window, dashboard, even car bonnet and any other smooth surfaces – making it a perfect suction mount for Go Pro & other action cameras.
  • ►【ADJUSTABLE AT EVERY JOINT - GET FLEXIBLE 180 DEGREE ROTATIONS & TILTS FOR PERFECT ANGLE】You should not have to restrict your angle, the adjustable joints and arms of our suction cup mount enables you to lock your go pro camera at the best visual angle and capture your best shots.
  • ►【WIDE RANGE OF USE AND BROAD COMPATIBILITY - QUICK & EASY TO INSTALL】 Without the need for additional mounting accessories, compatible with all GoPro Hero 9, 8, 7, 6, 5, 4, 3, 2, 1 models & Crosstour AKASO SJCAM sj7 Star SJ6 SJ7 legend M20 SJ7000 SJ6000 SJ6000 SJ4000 SJ6000 SJ, XiaoYi Yi II 4K APEMAN Campark H9R H8R SOOCOO C3 and other GoPro-like action cameras. Also compatible with any SLR DSLR Sony, Canon, Garmin, Tom Tom, Xiaoyi 4k or any camera that has a standard 1/4 inch thread.
  • ►★★GET MORE FOR YOUR MONEY – 1 x MiPremium Suction Cup Mount, 1 Tripod Mount with Stainless Steel rust proof thumbscrew. MiPremium suction cup mount is backed by 100% guarantee that you are fully satisfied with your product or receive your money back.
Bestseller No. 5
Jaws Flex Gooseneck Car Suction Cup Mount Holder for GoPro Hero 9 8 7 6 5 Black,SUREWO Flexible...
  • ★FLEXIBLE GOOSENECK SUCTION: This extension car suction cup mount is made up of 4 adjustable joints and every joint can be rotated 360 degree.
  • ★SOFT CAR SUCTION CUP: Strong suction holder,can be strongly adsorbed on any smooth surfaces.Such as glass surface, tile surface, table top and lacquer surface, etc.Can be used in a variety of scenarios,such as cars,boats,jet skis,etc.
  • ★STRONG COMPATIBILITY: This suction cup is not only suitable for most sports cameras(such as gopro hero 9/8/76 black,dji osmo action/akaso/crosstour and so on),but also suitable for mobile phones(such as iphone 11 pro/xs/xr/x/8,samsung,google,etc).
  • ★VERSATILE: It can be install outside the car,record the scenery along the way.Also can be install inside the car,record the dribs and drabs around the journey,or be used as a navigation stand to connect to a mobile phone in the car.We believe some pictures and videos will become precious memories for you.
  • ❗Pls make sure install your suction cup well before installing your camera or mobliephone.
SaleBestseller No. 6
Suction Cup for Gopro Mount Car Windshield Window Vehicle Boat Camera Holder for Gopro Suction Cup...
  • [NEWEST MODEL]- New Generation Suction Cup Mount GoPro Hero 9 Black with improve design that can extend the arm angle, suction lock handle PULLS DOWN instead of UP, exact same quality and design as the official GoPro Suction Cup Mount. For Hero 9 camera
  • [UNIQUE OUTSIDE VEHICLE POV] - With the industrial strength GoPro Suction Cup mount that can suction with industrial strength to any body of a carbon fiber vehicle, can act as a GoPro windshield mount and GoPro boat mount. Imagine taking a scenic video of your favorite route by placing the GoPro Suction Cup Mount on your windshield as gopro windshield mount or on the body of your hood as gopro car mount outside
  • [9 CM SUCTION DIAMETER = STRONG SUCTION and STABLE] - With the new compact design you can mount your action camera closer to the surface to minimize vibrations. The strength of the suction thoroughly tested. The diameter of the suction is 9 CM!
  • [WIDE MOTION] - The main adjustable arm moves at an unimpeded 270 degree and it comes with an adaptor that can move the camera in variety of angles, more flexible than other gopro suction cup mounts
  • [WORKS FOR ALL GOPRO MODEL] This Gopro Suction Cup is unviersal for all GoPro Cameras including the latest models, which includes GoPro Max 360, Hero 8 Black, Hero 7, Hero 6, Hero 5, Hero 4 and earlier models. This Hero 8 Black suction cup works for GoPro Cameras which have the folding fingers at the bottom.
Bestseller No. 7
Triple Cup DSLR Camera Suction Mount w/Ball Head Compatible with Nikon Canon Sony DSLR/Camcorder +...
  • STABILITY AND SECURITY: Unique tri-cup suction design with 3 vacuum super suction bases, It can be firmly adsorbed on any smooth surface, and keep in place even in the high-speed movement. Attention: For DSLR, we suggest using it in slow-moving or non-moving condition.
  • HIGH QUALITY AND DURABLE: High strength ABS material, lightweight but sturdy. Easily assemble and disassemble
  • WIDE APPLICATION: Attached to any smooth surfaces firmly with super suction power, such as surfboard, skiing board, ceramic surfaces, car windshield, plate glass door, car window, and roof etc.
  • With specific universal suction mount 1/4” ball head screw adapter, compatible with any camera with 1/4” screw, such as sports camera, camcorder, waterproof cameras and DSLR cameras. 360 degree rotation ballhead design ensures 360 degree shooting perspective.
  • Included GoPro Adapter for all GoPro-Like Action Cameras, such as: DJI OSMO ACTION /GoPro Hero 8 Hero 7 / 6 Hero 5 Black / Session / Hero 4 / Session / Hero+/ Hero+ LCD / Hero3+ / Hero3 SJCAM SJ4000 SJ4000WIFI SJ5000 Xiaomi YI Yi 4K DBPOWER GEEKPRO Lightdow LD4000 LD6000WIFI ASX ActionPro Canany QUMOX ICEFOX Vic Tsing Topjoy KIPTOP MAOZUA TomTom Bandit Garmin Virb X XE VIRB Ultra 30 + Cameras like Canon / Nikon / Penax / Olympus / Fujifilm / Panasonics/ VTech Kidizoom Kids Camera SONY Actioncams