Best Circular Saw For Woodworking – Top 7 Picks and Reviews 2020

We went over the reviews left by consumers and found the best of the best using our data-backed approach.

Here’s a look at the best Circular Saw For Woodworking

SaleBestseller No. 1
Makita 5007Mg Magnesium 7-1/4-Inch Circular Saw
234 Reviews
Makita 5007Mg Magnesium 7-1/4-Inch Circular Saw
  • Magnesium components create a lightweight saw (10.6 pounds) that is well balanced and jobsite tough
  • Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and jobsite durability
  • Two built in L.E.D lights illuminate the line of cut for increased accuracy
  • Large cutting capacity (2 to 1/2 inches at 90 degree) and bevel capacity (0 degree to 56 degree) with positive stops at 22.5 degree and 45 degree
  • 1 year warranty
Bestseller No. 2
TACKLIFE Electric Circular Saw with Aluminum Base, 12.5A, 5000 RPM Powerful Motor With Bevel Cuts...
9 Reviews
TACKLIFE Electric Circular Saw with Aluminum Base, 12.5A, 5000 RPM Powerful Motor With Bevel Cuts...
  • Laser Guide & Rip Fence: Integrated laser can guide cutting during operation and increase cutting accuracy. You can use the switch next to the handle to control the on/off mode. Rip Fence allows you to do a straight cut quickly, ideal for the DIY job at home and job-site.
  • Bevel Cutting & Depth Adjustment: By rotating the aluminum shoe, you can adjust the cutting angle from 0 degrees to 45 degrees freely to meet variable cuttings. The maximum cutting depth is 2-3/5 "at 90 ° and 1-7/10" at 45 °. The depth gauge lever is also equipped to allow adjustment of the base plate.
  • Powerful Motor & Aluminum Base: An upgraded version of the corded saw, it can produce up to 5,000 RPM of cutting power, ideal for cutting wood, plastic, and soft metal. The upper shield and gauge seat are made of aluminum alloy and are lighter and more deformation-resistant than ordinary saw blades.
  • Ergonomic Handle & Safety Design: Auxiliary soft rubber handle design, can reduce hand fatigue after long hours of double safety switch, only when the lock button and trigger are pressed at the same time, the saw blade can start to run and cut off. It can avoid the damage caused by accidental start.
Bestseller No. 3
SKIL 5280-01 15-Amp 7-1/4-Inch Circular Saw with Single Beam Laser Guide
705 Reviews
SKIL 5280-01 15-Amp 7-1/4-Inch Circular Saw with Single Beam Laser Guide
  • Powerful 15-amp motor delivers 5,300-RPM for greater speed and faster cuts
  • 7-1/4-inch carbide-tipped blade included. Spindle lock for easy blade changes.
  • 51 degree bevel capacity for a wide variety of cuts. Arbor size: 5/8 inches, cord length: 6 feet
  • Lightweight 6.95-pounds design reduces fatigue
  • Dust blower keeps line-of-cut free of sawdust for improved visibility. Anti-snag lower guard reduces snags when making narrow cut-offs
Bestseller No. 4
GALAX PRO 12A 5500RPM Corded Circular Saw with 7-1/4" Circular Saw Blade and Laser Guide Max Cutting...
  • Efficient and powerful motor: 12 Amps powerful pure copper motor windings, this circular saw can deliver full-size performance at 5,500 rpm to cut through tile, wood, metal panels, plastics and flooring in a single pass with accurate blade
  • Adjusting depth of cutting and bevel angel: A depth fast and accurate adjustment lever allows for adjustment of the saw's base plate. Maximum cutting depth at 90 degrees is 62mm and at 45 degrees it is 46mm. 0-45° bevel tilt function
  • Laser and rip fence: An adjustable fence for thinner cuts, with graduated ruler markings on the base and fence. The integrated adjustable laser allows following the line along the length; Circular saw equipped with a hex nut for blade replacement
  • Integrated dust extraction: Powerful integral blower keeps the line of cut sawdust free; Dust extraction facility for maintaining a clean work area and keeps the cut line free of dust for improved visibility; Only 7.1 lbs. and reduce your fatigue
  • What you get: Circular saw, 24-teeth TCT circular saw blade, rip guide, Hex key, dust blower, warranty Card
Bestseller No. 5
GALAX PRO 10 A 5800 RPM Hand-Held Circular Saw, Bevel Angle(0 to 45°) Joint Cuts with 7-1/4 Inch...
  • Powerful saw: 10 A powerful motor generates no load speed 5800RPM to slice through laminate flooring, wood, plastics, PVC pipe and plaster board at ease
  • Bevel and miter cuts: Not limited to making 0-degree cuts, the GALAX circular saw has multiple bevel and miter angles (0-45°), affording you the option of making your desired joint-forming cuts
  • Adjustable cutting depth: This circular saw has a depth adjustment lever that releases to allow for adjustment of the saw's base plate, perfect for plumbing applications such as taking up old floorboards. Max cutting depth is 2-1/2" at 90°and max cutting depth is 1-5/8" at 45°
  • Work safety: If you want to start up this circular saw, you need to press the lock-off button first, then press the on/off switch trigger; Double trigger strengthen the safety of operation and prevent accidental activation; And the plastic lower guard can be prevent users from accident danger
  • Accurate cuts and dust blower: Parallel guide assist you for precise and accurate cutting; Dust blower exhausts the saw dust away from the operator and keeps the cut line free of dust for improved visibility; Hex key for quick and easy blade change
Bestseller No. 6
Antrader 4-1/5" Diameter 40 Toothed Circular Saw Cutter for Woodworking Pack of 3
  • 💎Product Name : Saw Cutter; Net Weight :180g
  • 💎Material : Tungsten Carbide; Color : As Picture Show
  • 💎Diameter : 107mm/ 4.2"; Arbor Hole Diameter : 20mm/ 0.78"
  • 💎Teeth Quantity : 40; Speed (max.) : 12000 RPM
  • 💎Package Content : 3pcs x Saw Cutter, 3pcs x Spacer Washer
SaleBestseller No. 7
Circular Saw Blade, 8 Inch Ultra‑High Strength Carbide Circular Saw Blade Universal Model Cutting...
  • The circular saw blade is made of high‑quality hard alloy, which is very durable
  • The neatly arranged teeth are very quick, which can fast and smoothly cutting
  • This universal circular saw blade is specially designed for wood cutting for various purposes
  • Suitable for all cutting using softwood, hardwood, chipboard or plywood
  • With strong adaptability and is suitable for table saws or circular saws, is very good accessories.